News Detail

Why we choose Epoxy Anti-slip Micro-sand Flooring System?

  Not long ago, Guangzhou Television reported that the floor paint of underground parking lot in Guangzhou Huachenghui was too smooth, then resulted in frequent vehicle accidents.
    The reporter saw at the scene that due to water leakage in some parts of the parking lot, the ground is prone to water accumulation. Normal epoxy floor surface is smooth, in the case of water, whether it is car or pedestrian, it is easy to slip, which is the cause of the accident.


               #1 Screenshot of the News Report

    The value of life and health is no longer a rumor. A good floor should not only have a beautiful appearance, but also have good anti-slip and safety properties. In order to solve this problem, our company provides the following solutions for Huachenghui: on the basis of the original epoxy floor, roll NDS-113 epoxy micro-sand anti-slip floor paint to form a micro-sand surface, improving the slip resistance property. Here is the construction picture:

640 (1).jpg

               #2 NDS-113 Epoxy Micro-sand Anti-slip Floor Paint is under construction.

640 (2).jpg

               #3 Finished Micro-sand Anti-slip Surface

>>>>>>>> Still worrying about vehicle skidding?
    NDS113 epoxy micro-sand anti-slip floor paint can solve the problem of slipping, and reduce the braking noise and scratch. The most important thing is that the construction is simple, one time with roller applied is enough. Do not believe? come and see!

1. >>>> Anti-Slip <<<<
Test Conclusion
    The ground slip resistance is proportional to the ground friction coefficient, and the friction coefficient can usually be measured by the friction angle. The larger the friction angle, the larger the coefficient of friction.

640 (3).jpg

               #4 Measure the ground friction coefficient

Test Method:
    The slanted sample forms a slope, a heavy object is slid down on the slanted surface, continuously adjust the inclination angle of the sample, when the object falls at a constant speed, this angle is the friction angle.


               #5 Real Testing

Test Result:
    Micro-sand anti-slip epoxy sample: when the inclination angle is 30°,   the heavy object is still stationary.
Normal epoxy sample: when the inclination angle is 15°,   the heavy object falls.

640 (4).jpg

               #5 Project Reference

2. >>>> Noise Reduction <<<<
Test Conclusion
In garages that were applied normal epoxy floors, harsh noise can occur when driving, especially when braking.


               #6 Decibels

Test Method:
The decibel meter was used to test the noise of the car in the micro-sand anti-slip floor and the normal epoxy floor garage.


               #7 Noise test

Test Result:
Micro-sand anti-slip floor garage: 43.8 decibels in car.
Normal epoxy floor garage: 69.5 decibels in car.

3. >>>> Wear and Scratch Resistance <<<<
Test Conclusion
Scratch resistance, that is, the ability of the floor surface to be scratched by hard objects without leaving scratches.

Test Method:
Rub the micro-sand surface continuously with a coin and observe whether the surface has scratches or sands falling off.

640 (7).jpg

               #8 Test result

Test Result:
The coins are continuously rubbed with force, the surface is free of scratches, and the beads do not fall off.

3. >>>> Easy Installation <<<<


               #9 Installation by roller

How   to   Install?
After the curing of the leveling layer or the topcoat layer, uniformly roll one time to form a micro-sand anti-slip surface. Especially suitable for the normal smooth epoxy floor to reach a anti-slip performance, the material dosage is about 0.1-0.12kg/m2.

640 (8).jpg

               #10 Installation on the top of normal smooth epoxy paint

640 (9).jpg

               #11 Left: normal epoxy paint. Right: micro-sand anti-slip floor.

 Contact Details
leave a message
back to the top